T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks.
Machined aluminum cups thread together directly into a T47
BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit
between cups for added protection from dirt and grime, and also keeps your
internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive
side cup is left-hand thread and the non-drive side cup is right-hand thread.
Use a quality grease when installing in steel or aluminum BB shells, and an
anti-seize compound compatible with titanium BB shells.
Notes:
• Wheels Mfg T47 internal bearing BB for use with 24/22mm spindle cranks
may not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975,
SRAM S2275, CinQo Saturn, Saturn2) when used in BB shells with widths of 86.5mm
and wider. If your Quarq spider has an ID less than 49.5mm, your crank may rub
on the BB cup.
• Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle
MTB.
For cranks with standard axle length and 73mm bottom bracket width.
| Bottom Bracket/ Frame Interface: | T47 |
| Bottom Bracket Shell Width: | starting from 83,00mm |
| Bottom Bracket Shell I.D.: | 47x1,0mm Threaded |
| Crank Typ: | SRAM / GXP |
| Crank Spindle Diameter: | 22/24mm |
| Bearings: | ENDURO-BEARINGS Angular Contact |
| Replacement Bearings: | |
| Color: | black |
| Weight: | 129g |
| Recom. Tools: | • Enduro Bearings Press-in Tool • Enduro Bearings Universal Bearing Disassembly Tool • Wheels Manufacturing 44mm / 48,5mm BB Wrench |
| Instructions: |