Wheels Manufacturing Bottom Bracket T47 to Sram DUB, ABEC-3, black, inboard

 
RRP: €149,95
Art.Nr: 104252

T47 threaded BB cups for T47 frames and 29mm diameter spindle SRAM DUB compatible cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.

T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.

Compatibility:
• T47 shell with width of 86.5mm and SRAM DUB Road Crank
• T47 shell with width of 89.5mm, 92mm and SRAM DUB MTB Crank
• T47 shell with width of 121mm and SRAM DUB Fatbike Crank

Bottom Bracket/ Frame Interface: T47
Bottom Bracket Shell Width: 86mm - 121mm
Bottom Bracket Shell I.D.: 47x1.0mm
Crank Typ: Sram DUB
Crank Spindle Diameter: 29mm
Bearings: ENDURO-BEARINGS ABEC-3
Replacement Bearings: 2x Industrial Bearing 6806/29, (29mm x 42mm x 7mm)
Color: black
Weight: 97g
Recom. Tools: • Enduro Bearings Press-in Tool
• Enduro Bearings Universal Bearing Disassembly Tool
• Wheels Manufacturing 44mm / 48,5mm BB Wrench
Instructions: Installation guide

Available at the following stores.
Or online::
FAHRRADTEILE-SHOP.eu - Wheels Manufacturing Bottom Bracket T47 to Sram DUB, ABEC-3, black, inboard