PF30-CAMP adapts Campagnolo Ultra-Torque cranks to PressFit 30-standard frames. This
adapter fits over the installed crank bearings so no bearing removal is required for
installation. Simply tap the cranks with mounted adapters into the 6806 bearing in the
PressFit 30 BB. Tighten cranks to Campagnolo specifications.
PF30-CAMP was originally designed for use with SRAM PF30 bottom brackets with 6806 bearings installed. They will not work with newer SRAM PF30 bottom brackets that use a plastic insert that fits into the bearings and covers the outside of the bearings. Will not work with Wheels Manufacturing PF30 Bottom Brackets.
|Bottom Bracket/ Frame Interface:||• BBRIGHT PressFit|
• OSBB Carbon
• PressFit 30
|Bottom Bracket Shell Width:||61,00mm - 73,00mm|
|Bottom Bracket Shell I.D.:||46,0mm|
|Crank Typ:||Camp UT|
|Crank Spindle Diameter:||37,00mm|
|Replacement Bearings:||2x Industrial Bearing 6806 2RS, 42x30x7mm|
• Enduro Bearings Press-in Tool|
• Enduro Bearings Universal Bearing Disassembly Tool
|Instructions:||BBRight / OSBB Carbon / PF30 Installation Instruction|